Volvo Touch Up Paint Crystal White Pearl Code 707

Description

You are bidding on a pearl paint system
1/2 fluid OZ Of basecoat
1/2 fluid OZ Of pearl coat
Application tips
First coat is a basecoat of color.
Second a second coat of transparent pearl color.This coat is applied very thin to give the pearl effect.
In order to successfully match your color you should practice on a scrap piece of metal.
Application
First apply the basecoat. This is the main color coat. Make sure this has thoroughly dried for at least a few hours.  Next, apply pearl coat layer. This color goes on very thinly and you must practice a bit to get it right.
Make sure to get the primer and basecoat are sanded very smooth before applying the additional stages of paint. The primer should be wet sanded before applying the paint. Once pearl coat is applied over the basecoat, it becomes very difficult to smooth the basecoat paint.  You can use  #1500 grit sand paper(available separately in my touch up kit selling for .99) or rubbing compound to smooth the paint. Always let the basecoat dry thoroughly before applying the pearl coat .
The real trick is applying the pearl coat over the basecoat to achieve the right color. It's like using a colored transparent piece of plastic over the basecoat to change the color. Add too little, and the basecoat won't be changed enough; add too much, and you will change the basecoat too much and have to start over again. Make sure you
PRACTICE OFF
the vehicle to see how it turns out and keep comparing your practice work to the vehicle color. Pearl coats are best sprayed, but if you use very thin coats brushing, you can do a reasonable job. Applying a pearl coat is more difficult than a regular base-coat/clearcoat combination but with some practice you can achieve satisfactory results.
You are bidding on 1/2 ounce of paint. Paint will be shipped in a 1 ounce bottle.
1/2 ounce of paint is plenty of paint for many repairs