Kubelwagen Radio Cr Type 821 (Conversion), Resin, 1/35th scale, TW-35004

Description

Kubelwagen Radio Cr Type 821 (Conversion),
TW-35004
Unpainted
resin
1/35th scale, 12-piece
The next item in Tiger Werke's detail accessory line-up is #35004, Kubelwagen Radio Car (Type 821). This set consists of 12 finely cast resin parts that will replace half of the rear seat area of your 1/35 Kubelwagen with the radio mount, radio equipment and antenna mount for this versatile Wehrmacht communications vehicle.
This set is extremely simple in its assembly and installation, yet it provides a variation of the Kubelwagen that you probably haven't seen at any contest (yet). This communications vehicle would look perfect parked next to a Flak battery or a alongside a Tiger tank. The possibilities are endless, but the availability of this set is very limited!
Hints & Tips
All resin items should be washed with warm water and adding a few drops of detergent. Let air dry.
When sanding, grinding, or drilling resin, wear a particle mask or a NIOSH respirator approved for dust.
It is important not to inhale the resin dust, which could potentially cause an allergic reaction.
Wear safety goggles.
If you are wearing a dust mask or respirator, you need to be wearing goggles as well. They are also necessary if you are working with power tools and resin, such as when drilling, sanding or polishing.
The use of a suitable primer is recommended for bonding purposes. CA glue or epoxies needs to be used for resin items.
Not suitable for children.